Heatmiser DT Room Thermostat

The Heatmiser DT is a 230V, non programmable digital room thermostat, ideal for conventional or combi-boiler systems. This thermostat can be used to replace a mechanical thermostat as is designed to work along side a heating programmer.

The following features are available;
 

• Large display
• Automatic blue back-light (Turns off after 30 seconds)
• Flush mounting
• °C / °F Selectable
• Key Locking Facility
• Frost protection with adjustable temperature setting.
• Easily increase or decrease the required temperature
• Remote control optional
• Outputs: Volt free 3A Max
• Dimensions:  98mm x  85mm x 13mm (Height, Width, Depth)

Upgrading your Existing Thermostat and selecting the Terminal Output
1. Firstly, check that you have at least three wires (excluding the earth) behind your existing thermostat. If you have, the PRT is compatible.

2. The changeover terminal option is for those controlling a valve that needs power to open and power to close. If you are simply controlling a boiler, just select the standard model.

3. The DT thermostat is flush mounting, so a back box 35mm deep, will need to be installed in the wall.

These thermostats are available in 3 finishes - white, chrome and brass.

All finishes are coloured plastic.

Please specify whether standard or changeover is required.